What is plastic injection moulding?
The Principal of Plastic Injection Moulding The so-called plastic injection moulding process refers to: the plastic material in the barrel of an injection molding machine …
The Principal of Plastic Injection Moulding The so-called plastic injection moulding process refers to: the plastic material in the barrel of an injection molding machine …
Gate Design Considerations: 1.Injection molding gate is a small opening between the runners and the mold cavity. their location, quantity, shape and size, etc. have …
In today’s market, there are tons of material for customer to choose from. Therefore, The selection process of plastic injection molding resin materials is very …
How to choose plastic resin materials for plastic product? Read More »
I’ve had the opportunity to work in collaboration with injection mold companies from China for more than a decade. They are able to produce an …
How Do You Source Injection Mold Companies From China? Read More »
The layout design of a plastic injection mold is a very comprehensive job. To do it, you must understand the gate types, the design and …
There are many types of injection mold in injection molding industrial,the common injection mold types include:Two plate mold,Three plate mold,Hot runner mold.etc. 1.Single Parting Surface …
When industrial products are developing towards diversification and high quality, it is an important task to improve the quality of the molds that directly affect …
The chemical and physical properties of PA6(Nylon6) are similar to those of PA66(Nylon66), but the former has a low melting point and a wide process …
Difference between PA6(Nylon6) and PA66(Nylon66) Read More »
Plastic injection mold assembly constitutes one of the most important post-processes during injection mold manufacturing, since mold quality is closely related to assembly. Mold parts …
Plastic injection mold assembly process specification Read More »
Influence of Injection Mold Cooling Influence on Product Quality Surface Gloss: Many materials require a relatively high mold surface temperature to achieve a great surface …
A three-plate mold has three partings – the first is between the runner plate and the cavity plate, the second between the runner plate and …
01. Silver Mark As a matter of fact, this injection molding defects usually happens because the raw material is not dried. It occurs mostly during …
(1) What is jetting? (Appearance)Usually, the molten resin flows in the form of a jet stream. However, when flowing from a narrow area to a …